APE ApplePotion 1L

Application liquid for paint protection films
For optimal PPF installation, an application liquid that meets with the special properties of these films should be used. Yellotools APE ApplePotion allows the film to glide perfectly and to adhere by applying pressure. The film can be removed after a short time without any problems, making any corrections and changes easy.

Due to the basic properties of this potion, the adhesive of the protection film is not attacked and the film receives the desired glossy finish. The Low Cloud technology also prevents the adhesive from turning cloudy through the transparent film. The APE ApplePotion of course is fully bio-degradable, skin-friendly, clinically tested and pH-neutral.

Easy dosage, high effectiveness, low consumption
We recommend mixing the required amount of ApplePotion with distilled water before each new application. The application liquid is of course perfectly workable even after being stored for longer durations.

The practical dosing aid in the 1 litre bottle saves you the fiddling with measuring cups: Simply open the second lid in the dosing bottle and press the bottle in slightly until the small container (50 ml) has filled up. Add this dosage amount to 1 litre of distilled water, and ApplePotion is ready for the next application. The quantity of 50 ml is a general recommendation - just try out different mixing ratios and see what works best for you!