Reflectiv INT 320 Frosted from the Reflectiv INT 320 Frosted Stones series turns clear glass into a large number of different designs. These films soften the light without reducing the brightness of a room. Réflectiv window films are designed for use on any type of clear normal glass.
These films are mainly applied to facades, office buildings, schools, hospitals, studios and in homes.
Reflectiv INT 320 Stones gives the appearance of sandblasted or etched glass for a fraction of the cost.
Application Method:
Along the inside with water and a little mild soap.
The glass surface to be glued on has to be free from dust, grease or other contaminants. Some specific materials such as polycarbonate can cause air bubble problems. Therefore, a compatibility test is recommended.
*For high-performance glass or other deviant glass types you should contact Signfilm for advice.
Application temperature: min. + 5 ° C
Use: Reflective window films are designed for every type clear normal glass.
Maintenance after 30 days:
With usual cleaning solutions (non-abrasive, without ammonia). Cleaning products that may scratch the film should be avoided.
Durability: from 12 to 15 years for vertical application on the inside.
Storage: 2 years after delivery. This film must be kept away from extreme humidity and sun rays, minimum temperature above 10°C and below 38 ° C.
Material:
Polyester 36 microns
Fire Rating: M1
More Information
Price is per |
meter |
Material |
Design Window Films |
Brand |
Reflectiv |
Roll width |
152cm |
Length price |
meter |
Manufacturer |
N/A |